Makita XRJ05T 18V LXT reciprocating saw kit

Stroke length is how far the blade travels back and forth on each stroke. A longer stroke removes more material per pass and clears chips faster, which helps in demolition and thick wood. Shorter strokes can feel more controlled in tight spots and on thin metal.

Strokes per minute (SPM) is the top no-load blade speed. Higher SPM cuts wood faster, while lower speeds, set with the variable-speed trigger or dial, give more control and longer blade life in metal. Read it together with stroke length, since both affect cutting speed.

Tool length is the front-to-back measurement published by the maker. A shorter tool fits between studs, joists and inside cabinets more easily; standard US framing is 16 inches on center, leaving about 14-1/2 inches between studs. Check whether the figure includes the chuck or bit holder.

Brushless motors use electronic control instead of carbon brushes, which generally means less wear, less heat and more runtime per charge. Brushed motors are simpler and often cheaper, and are fine for lighter or occasional use, though their brushes can wear out over time.

This lists how many batteries come in the box, if any. Tool-only (bare) listings include no battery or charger, which suits buyers already on that battery platform. Two batteries let you charge one while working with the other.

Amp-hours (Ah) is the battery's charge capacity. At the same voltage, a higher Ah pack runs longer between charges but is usually larger and heavier. Smaller packs keep the tool lighter for overhead and light work; larger packs suit saws, grinders and other high-draw tools.

This states whether a charger is included and which type. Chargers vary in output, so the same battery can take noticeably different times to charge on different chargers. Tool-only listings usually include no charger.