Grinders and multi-tools / Bosch 18V
BARE TOOLBosch 18V

Bosch GWS18V-45CN 18V angle grinder

The GWS18V-45CN is the bare tool: no battery, no charger.

Published manufacturer specifications; sources last checked 2026-10-25.

Specifications

Wheel diameter
What this means

Wheel diameter is the largest wheel or disc the guard and spindle are designed for, commonly 4-1/2 or 5 inch on cordless grinders. A larger wheel gives more cut depth and reach. Never fit a wheel larger than rated, and check that the wheel's max RPM is at or above the grinder's speed.

4-1/2 in
Max speed
What this means

Max speed is the top no-load speed, in RPM for rotating tools. No-load means the tool is running free, so speed drops once it is working. On drills, many makers list a figure per gear: high for small bits, low for control with large bits or long screws.

9,000 RPM
Tool length
What this means

Tool length is the front-to-back measurement published by the maker. A shorter tool fits between studs, joists and inside cabinets more easily; standard US framing is 16 inches on center, leaving about 14-1/2 inches between studs. Check whether the figure includes the chuck or bit holder.

12.5 in
Motor
What this means

Brushless motors use electronic control instead of carbon brushes, which generally means less wear, less heat and more runtime per charge. Brushed motors are simpler and often cheaper, and are fine for lighter or occasional use, though their brushes can wear out over time.

Brushless
Batteries in box
What this means

This lists how many batteries come in the box, if any. Tool-only (bare) listings include no battery or charger, which suits buyers already on that battery platform. Two batteries let you charge one while working with the other.

0from the box list
Battery capacity (each)
What this means

Amp-hours (Ah) is the battery's charge capacity. At the same voltage, a higher Ah pack runs longer between charges but is usually larger and heavier. Smaller packs keep the tool lighter for overhead and light work; larger packs suit saws, grinders and other high-draw tools.

None includedfrom the box list
Charger in box
What this means

This states whether a charger is included and which type. Chargers vary in output, so the same battery can take noticeably different times to charge on different chargers. Tool-only listings usually include no charger.

Nofrom the box list
Warranty
What this means

This is the maker's published warranty term. Terms for tools, batteries and chargers often differ, and some depend on registration or exclude certain uses. Read the maker's terms for what is covered, how claims are handled and whether proof of purchase is required.

5 Year Limited Warranty (tool)

Compare this model with another tool.

Buying options

Battery and charger not included. See box contents.

Find GWS18V-45CN prices on Amazon Find GWS18V-45CN prices at eBay New tab, US retailers. Search results open where no exact listing is on file. Check the listing says GWS18V-45CN and tool only; marketplace sellers vary.

What is in the box with the GWS18V-45CN?

  • IncludedTool: angle grinder
  • Not includedBattery: needs a Bosch 18V battery (see batteries)
  • Not includedCharger (see chargers)
  • Not listedCase or bag: not confirmed in the published box list

Also in the box: Vibration Control Handle, Wheel Guard, Grinding Disc

Runs on Bosch 18V batteries. Which batteries fit?

Model number ending "N": Bare tool: no battery or charger. How Bosch model numbers work.

Model number GWS18V-45CN (also searched without hyphens as GWS18V 45CN).

Quick answers

Does the GWS18V-45CN come with a battery?
No. The GWS18V-45CN is a bare tool: no battery and no charger in the box.
Which batteries fit the GWS18V-45CN?
It runs on Bosch 18V batteries. Which batteries fit, in Bosch's own words.
What wheel size does the GWS18V-45CN take?
Wheel diameter: 4-1/2 in, as Bosch publishes it.
What is the GWS18V-45CN's top speed?
Max speed: 9,000 RPM, as Bosch publishes it.
Is the GWS18V-45CN brushless?
Yes. Bosch lists the motor as Brushless.
What is the GWS18V-45CN warranty?
5 Year Limited Warranty (tool), as Bosch publishes it.

Ranked lists that include this angle grinder

Owner reviews

Read the owner reviews on BoschTools.com

Sources

  1. Bosch US product page GWS18V-45CN (features), retrieved 2026-10-25

Spotted a wrong number? Report a spec error (opens an email with the model filled in). We re-check against the maker's page and correct the page.