GRABO GP-1Li-FB-1S GRABO 14.8V vacuum lifter kit
Checked 2026-10-19 against GRABO's US product page by Rob, licensed electrician
The GRABO GP-1Li-FB-1S is a GRABO 14.8V vacuum lifter, sold as a kit. GRABO publishes 265 lb (non-porous surface) working load limit, 375 lb (maximum lift; WLL is 265 lb) max lift, 20 L/min rated air flow, 11.6 psi maximum vacuum. In the box: GRABO PRO-LIFTER 20 tool, 14.8V 2.6Ah battery, battery charger, foam rubber seal, nylon carrying bag, replacement filters, manual. Source: GRABO's US product page, checked 2026-10-19.

Key specs
- Working load limit (non-porous surface)
- 265 lb (non-porous surface)
- Max lift (manufacturer rating)
- 375 lb (maximum lift; WLL is 265 lb)
- Rated air flow
- 20 L/min
- Maximum vacuum
- 11.6 psi
- Batteries in box
- 1
- Battery capacity (each)
- 2.6 Ah
- Charger in box
- Yes
- Continuous runtime (maker's figure)
- up to 1.5 hours
Not on GRABO's US product page for the GP-1Li-FB-1S: Weight with battery. We do not guess.
What is in the box with the GP-1Li-FB-1S?
- IncludedTool: vacuum lifter
- IncludedBattery: 14.8V 2.6Ah battery
- IncludedCharger: battery charger
- IncludedCase or bag: nylon carrying bag
Also in the box: foam rubber seal, replacement filters, manual
Paid link: we may earn a commission.
Check the GP-1Li-FB-1S price at GRABO Factory Shop New tab, US retailer. Check the listing says GP-1Li-FB-1S and names the kit contents.GRABO GP-1Li-FB-1S specifications
| Working load limit (non-porous surface) | 265 lb (non-porous surface) [1] |
| Max lift (manufacturer rating) | 375 lb (maximum lift; WLL is 265 lb) [1] |
| Rated air flow | 20 L/min [1] |
| Maximum vacuum | 11.6 psi [1] |
Batteries in boxWhat this meansThis lists how many batteries come in the box, if any. Tool-only (bare) listings include no battery or charger, which suits buyers already on that battery platform. Two batteries let you charge one while working with the other. | 1 [2] |
Battery capacity (each)What this meansAmp-hours (Ah) is the battery's charge capacity. At the same voltage, a higher Ah pack runs longer between charges but is usually larger and heavier. Smaller packs keep the tool lighter for overhead and light work; larger packs suit saws, grinders and other high-draw tools. | 2.6 Ah [1] |
Charger in boxWhat this meansThis states whether a charger is included and which type. Chargers vary in output, so the same battery can take noticeably different times to charge on different chargers. Tool-only listings usually include no charger. | Yes [2] |
| Continuous runtime (maker's figure) | up to 1.5 hours [1] |
| Minimum glass thickness | 6 mm minimum for glass [1] |
| Auto shut-off at altitude | Auto shut-off ceases around 3,600 ft; suction continues [1] |
| UPC barcode | 840082400462 [2] |
Ratings are GRABO's published figures from its US product pages, listed under Sources. Anything not on that page is left out rather than guessed. Check this against another model.
Paid link: we may earn a commission.
Check the GP-1Li-FB-1S price at GRABO Factory Shop
Quick answers about the GP-1Li-FB-1S
Does the GP-1Li-FB-1S come with a battery?
Yes: 14.8V 2.6Ah battery, plus battery charger.
What batteries does the GP-1Li-FB-1S use?
GRABO 14.8V batteries. Any battery from that system fits; capacity (Ah) changes run time, not fit.
GP-1Li-FB-1S manuals and official documents
Sources
- GRABO model specifications for GP-1Li-FB-1S, retrieved 2026-10-19
- GRABO US product page GP-1Li-FB-1S, retrieved 2026-10-19
Spotted a wrong number? Report a spec error (opens an email with the model filled in). We re-check against the maker's page and correct the page.
Researched by Rob, licensed electrician (Australia), 18 years on the tools. Found an error? Tell us.
We may earn a commission if you buy through our links. Retailer links are paid links; commission never changes what we publish. Affiliate disclosure.