Milwaukee 2833-20 M18 FUEL circular saw
The 2833-20 is the bare tool: no battery, no charger.
Published manufacturer specifications; sources last checked 2026-10-25.
Specifications
Blade diameterWhat this meansBlade diameter mainly sets how deep the saw can cut. Larger blades cut deeper, which matters for 2x lumber at a bevel and for thicker stock. Check the maker's listed cut depth at 90 and 45 degrees, and buy replacement blades in the stated diameter. | 6.5 in |
Weight, tool onlyWhat this meansTool-only weight is the bare tool without a battery, as listed by the maker. Add the battery weight to estimate what you will actually hold, since larger packs add noticeably. Weight matters most for overhead, ladder and all-day work. Makers do not always measure weight the same way. | 6.3 lb |
MotorWhat this meansBrushless motors use electronic control instead of carbon brushes, which generally means less wear, less heat and more runtime per charge. Brushed motors are simpler and often cheaper, and are fine for lighter or occasional use, though their brushes can wear out over time. | POWERSTATE Brushless |
Batteries in boxWhat this meansThis lists how many batteries come in the box, if any. Tool-only (bare) listings include no battery or charger, which suits buyers already on that battery platform. Two batteries let you charge one while working with the other. | 0from the box list |
Battery capacity (each)What this meansAmp-hours (Ah) is the battery's charge capacity. At the same voltage, a higher Ah pack runs longer between charges but is usually larger and heavier. Smaller packs keep the tool lighter for overhead and light work; larger packs suit saws, grinders and other high-draw tools. | None includedfrom the box list |
Charger in boxWhat this meansThis states whether a charger is included and which type. Chargers vary in output, so the same battery can take noticeably different times to charge on different chargers. Tool-only listings usually include no charger. | Nofrom the box list |
| Handle | Top Handle |
Tool lengthWhat this meansTool length is the front-to-back measurement published by the maker. A shorter tool fits between studs, joists and inside cabinets more easily; standard US framing is 16 inches on center, leaving about 14-1/2 inches between studs. Check whether the figure includes the chuck or bit holder. | 11.5 in |
WarrantyWhat this meansThis is the maker's published warranty term. Terms for tools, batteries and chargers often differ, and some depend on registration or exclude certain uses. Read the maker's terms for what is covered, how claims are handled and whether proof of purchase is required. | 5 Year Limited Warranty |
Buying options
Battery and charger not included. See box contents.
Paid link: we may earn a commission.
Find 2833-20 prices on Amazon Find 2833-20 prices at eBay New tab, US retailers. Search results open where no exact listing is on file. Check the listing says 2833-20 and tool only; marketplace sellers vary.What is in the box with the 2833-20?
- IncludedTool: circular saw
- Not includedBattery: needs a Milwaukee M18 battery (see batteries)
- Not includedCharger (see chargers)
- Not listedCase or bag: not confirmed in the published box list
Also in the box: Vacuum Adapter, Blade, Blade Wrench
Runs on Milwaukee M18 batteries. Which batteries fit?
Model number ending "20": Bare tool: no battery or charger. How Milwaukee model numbers work.
Model number 2833-20 (also searched without hyphens as 2833 20).
Quick answers
- Does the 2833-20 come with a battery?
- No. The 2833-20 is a bare tool: no battery and no charger in the box.
- Which batteries fit the 2833-20?
- It runs on Milwaukee M18 batteries. Which batteries fit, in Milwaukee's own words.
- What blade size does the 2833-20 take?
- Blade diameter: 6.5 in, as Milwaukee publishes it.
- How much does the 2833-20 weigh?
- Weight, tool only: 6.3 lb, as Milwaukee publishes it.
- Is the 2833-20 brushless?
- Yes. Milwaukee lists the motor as POWERSTATE Brushless.
- What is the 2833-20 warranty?
- 5 Year Limited Warranty, as Milwaukee publishes it.
Ranked lists that include this circular saw
- Circular saws by blade diameter (35 models)
- Circular saws by weight, tool only (9 models)
- Circular saws by tool length (21 models)
Owner reviews
Read the owner reviews on MilwaukeeTool.com
2833-20 manuals and official documents
- Manuals and documents for the 2833-20 MilwaukeeTool.com
Sources
- Milwaukee US product page 2833-20, retrieved 2026-10-25
Spotted a wrong number? Report a spec error (opens an email with the model filled in). We re-check against the maker's page and correct the page.