Fluke 117 multimeter
Checked 2026-10-17 against Fluke's US product page by Rob, licensed electrician
The Fluke 117 is a multimeter, sold on its own. Fluke publishes CAT III 600 V safety rating, 600 V DC voltage (max range), 600 V AC voltage (max range), 10 A AC current (max range). In the box: Fluke 117 Digital Multimeter, (1 pair) 4 mm silicone test lead set, Holster, Quick reference guide. Source: Fluke's US product page, checked 2026-10-17.
Key specs
- Safety rating (IEC 61010 CAT)
- CAT III 600 V
- DC voltage, max range
- 600 V
- AC voltage, max range
- 600 V
- AC current, max range
- 10 A
- DC current, max range
- 10 A
- True-RMS
- Yes
- Display resolution
- 6,000 counts
- Resistance, max range
- 40 MΩ
- Batteries (cells)
- 9 volt Alkaline
- Warranty
- 3 years
Not on Fluke's US product page for the 117: Low-impedance (LoZ) mode. We do not guess.
In the box
- IncludedMultimeter: Fluke 117 Digital Multimeter
- IncludedTest leads: (1 pair) 4 mm silicone test lead set
- Not listedBatteries: not in the maker's box list
- IncludedCase or holster: Holster
Paid link: we may earn a commission.
Find 117 prices on Amazon Find 117 prices at Acme Tools Find 117 prices at eBay New tab, US retailers. Search results open where no exact listing is on file. Check the listing says 117; marketplace sellers vary.- US retailer, ships from the US
- Free shipping over $199
- Family owned since 1948
- Acme Tools, as published on its site, checked 2026-10-17
Compared with
All specs
| Safety rating (IEC 61010 CAT) | CAT III 600 V |
| DC voltage, max range | 600 V |
| AC voltage, max range | 600 V |
| AC current, max range | 10 A |
| DC current, max range | 10 A |
| True-RMS | Yes |
| Display resolution | 6,000 counts |
| Resistance, max range | 40 MΩ |
| Batteries (cells) | 9 volt Alkaline |
| Warranty | 3 years |
| Capacitance, max range | 9,999 μF |
| Frequency, max range | 50 kHz |
| Size | 167 x 84 x 46 mm (6.57 x 3.31 x 1.82 in) |
| Weight | 550 g |
| UPC barcode | 095969324205 |
Ratings are Fluke's published figures from its US product page, listed under Sources. Anything not on that page is left out rather than guessed. Check this against another model.
Paid link: we may earn a commission.
Find the 117 at Amazon
Quick answers
What is the 117's safety (CAT) rating?
Fluke rates it CAT III 600 V. CAT IV covers the service entrance and utility side, CAT III distribution-level circuits such as panels and feeders; the lower of the meter's and the test leads' ratings is the one that applies. See our <a href="/cat-ratings-explained/">CAT ratings guide</a>.
Does the 117 measure DC current?
Yes: Fluke lists a DC current range up to 10 A.
Is the 117 true-RMS?
Yes, Fluke lists it as true-RMS, so readings on non-sinusoidal loads (drives, dimmers, electronic ballasts) are not averaged.
What batteries does the 117 use?
9 volt Alkaline (dry cells; no tool battery platform).
Does the 117 come with test leads?
Yes: (1 pair) 4 mm silicone test lead set.
Owner reviews
Read the owner reviews on Fluke.com
Manuals and official documents
- Users manual (PDF) covers 115C, 117C
- Users manual (PDF) covers 110/113/114/115/117
- Safety sheet (PDF) covers 110/113/114/115/116/117
- Calibration manual (PDF) covers 114, 115, 116, and 117
- Statement of memory volatility (PDF) covers 117, 116,115,114,113 and 110 Plus
- Extended Specs For 114, 115, 116, 117 (PDF)
- DMM Selection Chart (PDF)
Sources
- Fluke US product page 117, retrieved 2026-10-17
Spotted a wrong number? Report a spec error (opens an email with the model filled in). We re-check against the maker's page and correct the page.
Researched by Rob, licensed electrician (Australia). Found an error? Tell us.
We may earn a commission if you buy through our links. Retailer links are paid links; commission never changes what we publish. As an Amazon Associate, The Pro Verdict earns from qualifying purchases. Affiliate disclosure.