Ranked lists / 3/8 in impact wrenches
3/8 in impact wrenches ranked by tool length
9 3/8 in impact wrenches from DEWALT and Milwaukee, in order of the tool length each maker publishes on its US product page or manual. Lowest first. Figures are as published, not tested by us, and makers do not always measure the same way, so treat close figures as close. Each tool is listed once: a bare tool stands for its kits.
| # | Model | Tool length | |
|---|---|---|---|
| 1 | 3049-20 Milwaukee, bare tool | 4.5 in | |
| =2 | 2554-20 Milwaukee, bare tool, discontinued | 4.8 in | |
| =2 | 2562-20 Milwaukee, bare tool | 4.8 in | |
| =2 | 2854-20 Milwaukee, bare tool | 4.8 in | |
| 5 | DCF923B DEWALT, bare tool | 4.95 in | |
| 6 | 3060-20 Milwaukee, bare tool | 5.43 in | |
| 7 | 2758-20 Milwaukee, bare tool | 5.9 in | |
| 8 | 2960-20 Milwaukee, bare tool | 6 in | |
| 9 | 2454-20 Milwaukee, bare tool | 6.5 in |
Want two side by side? Compare any two models. Prices and stock are on each model page.
Other ranked lists
- Angle grinders by max speed
- Angle grinders by tool length
- Angle grinders by weight with battery
- Angle grinders by weight, tool only
- Angle grinders by wheel diameter
- Batteries by battery weight
- Batteries by energy
- Dewalt 20v max batteries by battery capacity
- Milwaukee m12 batteries by battery capacity
- Milwaukee m18 batteries by battery capacity
- Circular saws by blade diameter
- Circular saws by max bevel
- Circular saws by max cut depth at 45 degrees
- Circular saws by max cut depth at 90 degrees
- Circular saws by max speed
- Circular saws by tool length
- Circular saws by weight with battery
- Circular saws by weight, tool only
- Clamp meters by AC current, max range
- Clamp meters by AC voltage, max range
- Clamp meters by capacitance, max range
- Clamp meters by DC current, max range
- Clamp meters by display resolution
- Clamp meters by frequency, max range
- Clamp meters by jaw opening
- Clamp meters by resistance, max range
- Drill drivers by max speed
- Drill drivers by max torque
- Drill drivers by tool length
- Drill drivers by weight with battery
- Drill drivers by weight, tool only
- Hammer drills by hammer rate
- Hammer drills by max speed
- Hammer drills by max torque
- Hammer drills by tool length
- Hammer drills by weight with battery
- Impact drivers by impact rate
- Impact drivers by max speed
- Impact drivers by max torque
- Impact drivers by tool length
- Impact drivers by weight with battery
- Impact drivers by weight, tool only
- Impact wrenches by impact rate
- Impact wrenches by max breakaway torque
- Impact wrenches by max speed
- Impact wrenches by max torque
- Impact wrenches by tool length
- Impact wrenches by weight with battery
- Impact wrenches by weight, tool only
- 1/2 in impact wrenches by impact rate
- 1/2 in impact wrenches by max breakaway torque
- 1/2 in impact wrenches by max speed
- 1/2 in impact wrenches by max torque
- 1/2 in impact wrenches by tool length
- 1/2 in impact wrenches by weight with battery
- 1/2 in impact wrenches by weight, tool only
- 1/2 in square drive impact wrenches by max speed
- 1/2 in square drive impact wrenches by max torque
- 1/2 in square drive impact wrenches by tool length
- 3/8 in impact wrenches by impact rate
- 3/8 in impact wrenches by max breakaway torque
- 3/8 in impact wrenches by max speed
- 3/8 in impact wrenches by max torque
- 3/8 in impact wrenches by weight, tool only
- Multimeters by AC current, max range
- Multimeters by AC voltage, max range
- Multimeters by capacitance, max range
- Multimeters by DC current, max range
- Multimeters by display resolution
- Multimeters by frequency, max range
- Multimeters by resistance, max range
- Multimeters by weight
- Oscillating multi-tools by oscillations per minute
- Oscillating multi-tools by tool length
- Reciprocating saws by stroke length
- Reciprocating saws by strokes per minute
- Reciprocating saws by tool length
- Reciprocating saws by weight with battery
- Reciprocating saws by weight, tool only